仔细学习第N遍了，开始不能变频，运行snb-e脚本后可以变频了，后来又发现只有2档，然后又来看一遍，今晚按照大神的步骤，步步为营，希望能有更多档变频，CPU型号：E5-2660 0
谢谢楼主分享！我的现在有5档变频了！
谢谢楼主的分享
这个太专业了~~
syscl 发表于 2015-3-18 16:46 https://www.pcbeta.com/static/image/common/back.gif
关于其他平台变频文件的生成，我们可以仿照前面的参数进行自定义操作。
下载『User Defined.cfg』，用『文 ...
谢谢分享！！！！
发线Q9450和X3350的处理器不知道怎么自定义。
分别对应着处理器型号，TDP，基础频率（blck），时钟频率，最高睿频，核心数，线程数，平台类型，总线频率。
其中，基础频率（blck）和总线频率不会填，Intel的网页也查不到。要晕过去了
我的l5420不支持！！！
你好，比如未知的cpu 7800X怎么办啊
感谢分享{:5_262:}
不错呦！！！
感谢！！！！！
厉害了我的哥！！！
码一下，以后用得到{:5_262:}
支持了 试一下看看能否正常加载X86
Generating ssdt.dsl for a 'iMacPro1,1' with board-id
Intel W-2150B processor setup
With a maximum TDP of 120 Watt, as specified by Intel
Number logical CPU's: 20 (Core Frequency: 3000 MHz)
Number of Turbo States: 15 (3100-4500 MHz)
Number of P-States: 34 (1200-4500 MHz)
Injected C-States for CP00 (C1,C3,C6,C7,C8,C9,C10)
Injected C-States for CP01 (C1,C2,C3,C6,C7)
Warning: Model identifier (iMacPro1,1) not found in..: /S*/L*/CoreServices/PlatformSupport.plist
Warning: 'cpu-type' may be set improperly (0x0f01 instead of 0x0901)
- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Error: board-id not supported by Skylake – check SMBIOS data / use the -target option
syscl 发表于 2015-3-18 16:46 https://www.pcbeta.com/static/image/common/back.gif
关于其他平台变频文件的生成，我们可以仿照前面的参数进行自定义操作。
下载『User Defined.cfg』，用『文 ...
Generating ssdt.dsl for a 'iMacPro1,1' with board-id
Intel W-2150B processor setup
With a maximum TDP of 120 Watt, as specified by Intel
Number logical CPU's: 20 (Core Frequency: 3000 MHz)
Number of Turbo States: 15 (3100-4500 MHz)
Number of P-States: 34 (1200-4500 MHz)
Injected C-States for CP00 (C1,C3,C6,C7,C8,C9,C10)
Injected C-States for CP01 (C1,C2,C3,C6,C7)
Warning: Model identifier (iMacPro1,1) not found in..: /S*/L*/CoreServices/PlatformSupport.plist
Warning: 'cpu-type' may be set improperly (0x0f01 instead of 0x0901)
- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Error: board-id not supported by Skylake – check SMBIOS data / use the -target option
syscl 发表于 2015-3-18 16:46 https://www.pcbeta.com/static/image/common/back.gif
关于其他平台变频文件的生成，我们可以仿照前面的参数进行自定义操作。
下载『User Defined.cfg』，用『文 ...
Generating ssdt.dsl for a 'iMacPro1,1' with board-id
Intel W-2150B processor setup
With a maximum TDP of 120 Watt, as specified by Intel
Number logical CPU's: 20 (Core Frequency: 3000 MHz)
Number of Turbo States: 15 (3100-4500 MHz)
Number of P-States: 34 (1200-4500 MHz)
Injected C-States for CP00 (C1,C3,C6,C7,C8,C9,C10)
Injected C-States for CP01 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0f01 instead of 0x0901)
- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Error: board-id not supported by Skylake – check SMBIOS data / use the -target option
这怎么解决?
谢谢分享。
Generating ssdt.dsl for a 'MacPro6,1' with board-id
Unknown Core E5-2689 processor setup
With a maximum TDP of 115 Watt, as specified by Intel
Number logical CPU's: 32 (Core Frequency: 2600 MHz)
Number of Turbo States: 10 (2700-3600 MHz)
Number of P-States: 25 (1200-3600 MHz)
Injected C-States for C200 (C1,C3,C6)
Warning: 'cpu-type' may be set improperly (0x instead of 0x0a)
- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Warning: 'board-id' is not supported by Unknown power management
Warning: 'system-type' may be set improperly (1 instead of 0)
- Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups
Compiling: ssdt_pr.dsl
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180427(RM)
Copyright (c) 2000 - 2018 Intel Corporation
ASL Input: /Users/yixuanzou/Library/ssdtPRGen/ssdt.dsl - 570 lines, 17588 bytes, 153 keywords
AML Output: /Users/yixuanzou/Library/ssdtPRGen/ssdt.aml - 5169 bytes, 71 named objects, 82 executable opcodes
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
Do you want to open ssdt.dsl (y/n)? n
高手帮忙
非常感谢，哈哈哈哈。