X230装10.10.5后，如何开双核八线程，有相关方法和教程吗
本帖最后由 子木山 于 2015-12-25 13:51 编辑用Clover_v2.3k_r3330引导安装的原版，已经折腾两个礼拜了！但是不完美！
1、CPU现在只是单核4线程;
看了“【一切尽在这里】置顶向导集合贴, 黑苹果资源大全 V4.4”
好像没有提到开启双核的帖子或方法！
希望各路大大可以帮个忙，或者提供点思路，在此先谢过了！下面上一下开机日志（-v图）：
Longterm timer threshold: 1000 ms
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 14.5.0: Wed Jul 29 02:26:53 PDT 2015; root:xnu-2782.40.9~1/RELEASE_X86_64
vm_page_bootstrap: 3829127 free pages and 299641 wired pages
kext submap , kernel text
zone leak detection enabled
"vm_compressor_mode" is 4
multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 13
TSC Deadline Timer supported and enabled
"name" not a kext
"FailedCLUT" not a kext
"FailedImage" not a kext
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for AMFI
Security policy loaded: Apple Mobile File Integrity (AMFI)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
AppleKeyStore starting (BUILT: Jul 29 2015 02:03:38)
FakeSMCKeyStore: started
IOAPIC: Version 0x20 Vectors 64:87
ACPI: sleep states S3 S4 S5
RTC: Only single RAM bank (128 bytes)
AppleIntelCPUPowerManagement: Turbo Ratios 0057
AppleIntelCPUPowerManagement: (built 02:00:30 Jul 29 2015) initialization complete
FakeSMC v6.6.1274 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.
pci (build 02:08:07 Jul 29 2015), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
[ PCI configuration begin ]
FakeSMC: 13 preconfigured keys added
FakeSMC: 5 keys exported by Clover EFI
SMC: successfully initialized
console relocated to 0xf80000000
[ PCI configuration end, bridges 4, devices 13 ]
mcache: 4 CPU(s), 64 bytes CPU cache line size
mbinit: done
pci168c,2b cannot assert wake from D3cold
rooting via boot-uuid from /chosen: 44BF549A-421F-37AA-9F51-09E09E5C8B65
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
vendor:device: 0x8086:0x1502.
AppleIntelE1000e(Info): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
AppleIntelE1000e(Info): changing MTU from 0 to 1500
VoodooPS2SynapticsTouchPad loaded
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
VoodooPS2Trackpad: Synaptics TouchPad v8.1
No interval found for . Using 8000000
AppleIntelE1000e(Info): AppleIntelE1000e:rx = 256, tx = 256
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT1@1F,2/AppleIntelPchSeriesAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/M4-CT128M4SSD3 Media/IOGUIDPartitionScheme/MAC OS X@2
BSD root: disk0s2, major 1, minor 2
hfs: mounted MAC OS X on device root_device
VM Swap Subsystem is ON
IOGraphics flags 0x43
Previous shutdown cause: 5
DSMOS has arrived
-- completed
No interval found for . Using 8000000
PPGTT is enabled
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
-- power management may be incomplete or unsupported
Sound assertion in AppleHDADriver at line 1540
Sound assertion in AppleHDADriver at line 2200
Sound assertion in AppleHDADriver at line 199
AppleKeyStore:Sending lock change 0 for handle -501
Sandbox: Finder(207) System Policy: deny file-write-unlink /Users/Apri/Library/Saved Application State/com.apple.finder.savedState/restorecount.plist
Sound assertion in AppleHDADriver at line 3575
Sound assertion in AppleHDADriver at line 1084
**** -- Missing Bluetooth Controller Transport!
系统配置及相关信息：
--------[ 概览 ]----------------------------------------------------------------------------------
电脑型号 联想 ThinkPad X230 笔记本电脑
处理器 英特尔 第三代酷睿 i7-3520M @ 2.90GHz 双核
主板 联想 2306CTO ( 英特尔 Ivy Bridge - QM77 Express 芯片组 )
显卡 英特尔 HD Graphics 4000 ( 2 GB / 联想 )
内存 16 GB ( 三星 DDR3 1600MHz )
主硬盘 Crucial M4-CT128M4SSD3 ( 128 GB / 固态硬盘 )
显示器 联想 LEN40E2 ( 12.7 英寸)
声卡 瑞昱 ALC269 @ 英特尔 Panther Point High Definition Audio Controller
蓝牙 BCM20702A0
网卡 英特尔 82579LM Gigabit Network Connection / 联想
无线网卡 后加的AR9285
-----------------------------------------------------------------------------------------------------
顶顶啊！
各路大神！
顶顶！各版主个大神，帮忙看看啊！！！
页:
[1]