变色龙引导进不去安装界面直接灰屏
看不清的话点击图片放大或者看我手打的吧。。。。：
Loading darwin 10.0
Using a non default kernel (/System/Library/Kernels/kernel) without specifying 'Kernel Cache' path, KernelCache will not be used
Loading Kernel /System/Library/Kernels/kernel
Read HFS+ file: 4096 bytes.
Read HFS+ file: 10610464 bytes.
kernel_patcher,c: Patching 64bit XNU Kernel 14.0.0
Darwin Kernel Version 14.0.0. Set May 24 01:15:10 PDT 2014;*patched-2738.0.0.0.5~1/RELEASE_X86_64
commpage_patch.c:_commpage_stuff_routine patched.
lapic_patch.c: lapic_init panic removed.
lapic_patch.c: lapic_interrupt panic removed
bootstrap_patch.c:KLDBootstrap::readBooterExtensions() call injected into KLDBootstrap::readPrelinkedExtensions(void* section_64)
kernel_patcher.c: Returning...
Press a key to continue...
随便按下键盘后。检测安装盘驱动。然后直接灰屏。。。没有光标。鼠标也不能移动之类的。。。等了十几分钟
有谁遇到过没。
这是机器具体信息。然后用的是加精的这个帖子：Win下使用变色龙r2378+ 引导 OS X 10.10 懒人版通用教程
org.chameleon.Boot文件也尝试修改过。删除SLE部分驱动也没用。
这是原Boot.plist内容：
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GraphicsEnabler</key>
<string>No</string>
<key>Instant Menu</key>
<string>Yes</string>
<key>Kernel</key>
<string>/System/Library/Kernels/kernel</string>
<key>Kernel Flags</key>
<string>-v -f kext-dev-mode=1</string>
<key>ShowInfo</key>
<string>Yes</string>
</dict>
</plist>
这是原smboot.plist内容:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>01/02/08</string>
<key>SMbiosversion</key>
<string>MP31.88Z.006C.B02.0801021250</string>
<key>SMboardproduct</key>
<string>Mac-F42C88C8</string>
<key>SMfamily</key>
<string>MacPro</string>
<key>SMmanufacter</key>
<string>Apple Inc.</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMserial</key>
<string>G88014V4XYK</string>
</dict>
</plist>
尝试修改过的org.chameleon.Boot.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Graphics Mode</key>
<string>1024x768x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Instant Menu</key>
<string>Yes</string>
<key>Kernel</key>
<string>/System/Library/Kernels/kernel</string>
<key>Kernel Flags</key>
<string>-v -f kext-dev-mode=1</string>
<key>ShowInfo</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>No</string>
</dict>
</plist>
都是一样的。请教下大家！这样要怎么解决呢？？？
本帖最后由 fancysun 于 2016-1-12 19:25 编辑
现在好了。但是出现另外一个卡住问题。看图吧。卡在哪里了。也是等了10分钟没反应。。。。只能长按电源关机重启！
查了下新旧版的五国图貌似也没有跟我一样样的。稍微有点异样的就是新版的五国那个帖子说了的替换
FakeSMC.kext
那个？但是我替换了2个也是异样不行
截图为同一张。不知道方框中中得disabled有没有什么影响？？ 有没有有人啊啊啊！？？？？
页:
[1]