暮已晚 发表于 2020-8-21 16:19

惠普HP-EliteDesk-800-G2-i7 6700 HD530

本帖最后由 暮已晚 于 2020-8-23 13:10 编辑


[*]硬件配置：

[*] HP EliteDesk 800 G2 Tower PC
[*]Skylake
[*]HP EliteDesk 800 G2 TWR
[*]MOBO HP 8053 (U3E1)
[*]Intel® 8 Q170
[*]BIOS 02.47
[*]Intel Core i7 6700 @ 3.40GHz Skylake
[*]GPU: Integrated: Intel® HD Graphics 530
[*]8GB DDR4 2133
[*]Audio: Realtek ALC 221 Audio (revision 0x100103)
[*]Network: Intel® I219LM Gigabit Network Connection LOM
[*]Display: HP ProDisplay P222va

一、BIOS更新与配置从这里下载最新的BIOS(目前为发布于2020年5月11日的02.47版) https://support.hp.com/cn-zh/drivers/selfservice/hp-elitedesk-880-g2-tower-pc/8961042/model/9009391?sku=L1G84AV
[*]1、更新 BIOS:
把下载的.bin文件放在目录EFI/HP/BIOS/new下（如果没有则新建），更新完毕后需要设置BIOS，否则开不了机。


[*]2、BIOS设置
[*]Broke Raid without any problem on booting from one disk (computer came with no raid)Setup disk as AHCI (there is no option on the BIOS)Advanced > Security > TPM Embedded Security > TPM Device HiddenAdvanced > Security > BIOS SureStart > Unchecked ALLAdvanced > Security > System Management Command UncheckedAdvanced > Security > SIntel Software Guard Extensions (SGX) DisableAdvanced > Boot Options > UEFI boot order Checked (do this or else it will not boot from the stick)Advanced > Boot Options > Audio Alerts During Boot UncheckedAdvanced > Secure Boot Configuration > Unchecked ALLAdvanced > Secure Boot Configuration > Configure Legacy Support and Secure Boot Legacy Support Enable and Secure Boot DisableAdvanced > System Options > Configure Storage Controller for RAID UncheckedAdvanced > System Options > VTx CheckedAdvanced > System Options > VTd UncheckedAdvanced > System Options > PCI* UncheckedAdvanced > System Options > Allow PCIe/PCI SERR# Interrupt CheckedAdvanced > Built-In Device Options > Video memory size 512MB hereAdvanced > Built-In Device Options > Audio Device CheckedAdvanced > Built-In Device Options > Internal Speakers CheckedAdvanced > Port Options > Serial Port A UncheckedAdvanced > Port Options > SATA* CheckedAdvanced > Port Options > *USB* CheckedAdvanced > Port Options > USB Charging Port Function CheckedAdvanced > Port Options > Media Card Reader/SD_RDR USB CheckedAdvanced > Port Options > Restrict USB Devices Allow all USB DevicesAdvanced > Power Management Options > Runtime Power Management CheckedAdvanced > Power Management Options > Extended Idle Power States CheckedAdvanced > Power Management Options > S5 Maximum Power Savings CheckedAdvanced > Power Management Options > SATA Power Management CheckedAdvanced > Power Management Options > PCI Express Power Management CheckedAdvanced > Power Management Options > Power On from Keyboard Ports UncheckedAdvanced > Power Management Options > Unique Sleep State Blink Rates UncheckedAdvanced > Remote Management Options > Active Management (AMT) UncheckedAdvanced > Option ROM Launch Policy > Configure Option ROM Launch Policy > All UEI for the multimonitor support on boot
三：EFI：





老唱机1991 发表于 2020-9-18 10:02

HD530 睡眠唤醒正常么？

rathan 发表于 2020-9-18 13:35

哇，不容易，我以为这个机型已经没人用黑苹果了

superman1981 发表于 2020-9-18 22:54

好东西 。。不错了，

暮已晚 发表于 2020-9-22 08:52

老唱机1991 发表于 2020-9-18 10:02 https://www.pcbeta.com/static/image/common/back.gif
HD530 睡眠唤醒正常么？

不正常，无法唤醒屏幕，也没有解决。
https://github.com/sakoula/HP-EliteDesk-800-G2-6700
这儿有解决办法 我没试

自由自由 发表于 2020-9-22 13:23

谢谢。。。。。。。。。。。学习一下400G2

mrtigerr 发表于 2020-9-22 21:14

谢谢分享{:5_262:}

vqf 发表于 2020-9-23 20:18

来支持一下

vqf 发表于 2020-9-23 20:19


来支持一下

西门大嫂 发表于 2020-10-2 11:47

谢谢分享，谢谢

西门大嫂 发表于 2020-10-3 11:49

好东西 。。不错了，

西门大嫂 发表于 2020-10-7 21:43


谢谢楼主分享

ricklang 发表于 2020-10-19 14:23

谢谢分享！！

Guoliao 发表于 2020-10-24 17:36

谢谢！！！！

木头羊 发表于 2020-10-25 15:09

谢谢分享，谢谢

木头羊 发表于 2020-10-25 15:11

谢谢分享！！

老唱机1991 发表于 2020-11-4 15:01

https://bbs.pcbeta.com/viewthread-1874365-1-1.html

我看有老哥 desktop hd530 在 oc 0.6.3 上正常了

可惜我没办法换oc，还得引导win，Ubuntu

无情浪子 发表于 2020-11-4 17:37

老唱机1991 发表于 2020-11-4 15:01 https://www.pcbeta.com/static/image/common/back.gif
https://bbs.pcbeta.com/viewthread-1874365-1-1.html

我看有老哥 desktop hd530 在 oc 0.6.3 上正常了


oc也可以引导win和ubuntu吧

老唱机1991 发表于 2020-11-4 18:24

无情浪子 发表于 2020-11-4 17:37 https://www.pcbeta.com/static/image/common/back.gif
oc也可以引导win和ubuntu吧

看了下 最新的可以了 而且支持 GUI 插件
已经在搞ing了

暮已晚 发表于 2020-11-4 23:09

老唱机1991 发表于 2020-11-4 15:01 https://www.pcbeta.com/static/image/common/back.gif
https://bbs.pcbeta.com/viewthread-1874365-1-1.html

我看有老哥 desktop hd530 在 oc 0.6.3 上正常了


我也是Win10+Ubuntu+macOS，OC能够正常引导这些系统。目前我最大的问题是macOS的睡眠唤醒。我调整成了不睡眠。
页: [1] 2
查看完整版本: 惠普HP-EliteDesk-800-G2-i7 6700 HD530