[已解决]升级到14睡眠风扇不停转
本帖最后由 lijiajin2020 于 2023-10-11 00:22 编辑amd 锐龙黑果，b450m迫击炮，之前ventura版本睡眠正常，升级到14之后睡眠只关闭了显示器，cpu风扇不停转，睡眠后看功率还在90w左右，可以鼠标键盘唤醒。有大佬知道为啥吗，或者是否有排查思路。OC配置如下
是不是只是息屏了，没睡眠
lara_222 发表于 2023-10-7 15:32 https://bbs.pcbeta.com/static/image/common/back.gif
是不是只是息屏了，没睡眠
看起来是，但是不知道怎么入手解决 手动睡眠或者自动睡眠都可以使显示器息屏，但是cpu还在跑不断电
log show --last 1d | grep "Wake reason"查不到任何睡眠记录
macos12 一路升级过来的，之前睡眠都是正常的，麻烦有经验的兄弟给个方向 USB定制好了没有 teniubi250 发表于 2023-10-10 09:32 https://bbs.pcbeta.com/static/image/common/back.gif
USB定制好了没有
当初装12的时候就已经定制了，一直到ventura都很正常，更新过很多小版本，14目前我没有重新定制 试试看吧 我都是每升一个大版本 就重新定制一次 试试我最新的https://bbs.pcbeta.com/viewthread-1982334-1-1.html 本帖最后由 lijiajin2020 于 2023-10-10 21:53 编辑
qwert6081 发表于 2023-10-10 18:52 https://bbs.pcbeta.com/static/image/common/back.gif
试试我最新的https://bbs.pcbeta.com/viewthread-1982334-1-1.html
我看下吧 经过仔细的排查与usb定制没有关系，毕竟原本都是定制好的，刷了好几天帖子但凡跟睡眠有关的都让定制usb，或者查看唤醒原因，很明显我这种情况都不适用 排查过程主要是看日志具体分析
首先 pmset -g log | grep -e "Sleep.*due to" -e "Wake.*due to"
发现大部分情况并没有日志，偶尔会有下面日志，darkwake 也就是说并没进入睡眠，跟睡眠即醒是不一样的
2023-10-06 12:26:01 +0800 Sleep Entering DarkWake state due to 'Software Sleep pid=170':TCPKeepAlive=disabled Using AC (Charge:0%) 536 secs
2023-10-06 12:34:57 +0800 Wake DarkWake to FullWake from Invalid : due to HID Activity Using AC (Charge:0%)
2023-10-08 00:28:07 +0800 Sleep Entering DarkWake state due to 'Software Sleep pid=163':TCPKeepAlive=disabled Using AC (Charge:0%) 44 secs
2023-10-08 00:28:51 +0800 Wake DarkWake to FullWake from Invalid : due to HID Activity Using AC (Charge:0%) 144 secs
2023-10-08 00:31:15 +0800 Sleep Entering DarkWake state due to 'Software Sleep pid=163':TCPKeepAlive=disabled Using AC (Charge:0%) 4 secs
2023-10-08 00:31:19 +0800 Wake DarkWake to FullWake from Invalid : due to HID Activity Using AC (Charge:0%) 11 secs
2023-10-08 00:31:30 +0800 Sleep Entering DarkWake state due to 'Software Sleep pid=163':TCPKeepAlive=disabled Using AC (Charge:0%) 74 secs
2023-10-08 00:32:44 +0800 Wake DarkWake to FullWake from Invalid : due to HID Activity Using AC (Charge:0%) 然后获取了最近睡眠相关的日志log show --last 1h | grep "sleep" > sleep.log 分析
很明显睡眠过程先是显示器睡眠了，然后睡眠被PCI设备阻止 （kPMPCIUnsupported）下面紧着就是罪魁祸首pci8086,2725， 这个是Intel AX201
2023-10-10 23:53:34.378916+0800 0x108d Default 0x0 564 0 WiFiAgent: (IO80211) Info: <WiFiAge> Display will sleep
2023-10-10 23:53:34.379141+0800 0xc44 Default 0x0 473 0 NotificationCenter: Display sleep
2023-10-10 23:53:34.552309+0800 0xc44 Default 0x0 473 0 NotificationCenter: Displays are now sleeping
), sleep alarms: (
2023-10-10 23:53:37.421652+0800 0x79 Default 0x0 0 0 kernel: PMRD: DarkWake: sleepASAP 1, clamshell closed 0, disabled 0/0, desktopMode 1, ac 1
2023-10-10 23:53:37.421654+0800 0x79 Default 0x0 0 0 kernel: PMRD: System sleep prevented by kPMCPUAssertion
2023-10-10 23:53:51.218212+0800 0xab55 Default 0x0 0 0 kernel: PMRD: DarkWake: sleepASAP 1, clamshell closed 0, disabled 0/0, desktopMode 1, ac 1
2023-10-10 23:53:51.218448+0800 0xab55 Default 0x0 0 0 kernel: (AppleACPIPlatform) System sleep prevented by pci8086,2725
2023-10-10 23:53:51.218451+0800 0xab55 Default 0x0 0 0 kernel: (AppleACPIPlatform) System sleep prevented by pci8086,2725
2023-10-10 23:53:51.218453+0800 0xab55 Default 0x0 0 0 kernel: PMRD: System sleep prevented by kPMPCIUnsupported 然后联想到我之前看到某个帖子说不要随便在设备属性里注入pci设备的slot，我就把ax201注释掉了，
随后就可以正常睡眠了 给大家看下正常的睡眠过程，多看日志更有助于解决问题，希望对大家有帮助
页:
[1]