全套BIOS添加SLIC工具-Phoenixtool2.73，Amitool1.63，Awardtool1.53
自行修改BIOS集火已经默默地用了十几年了，这几个工具都是最终版，虽然后面没再出了，但是仍旧好用，集中贡献给大家，使用方法自行搜索，多的是1、修改UEFI类型的BIOS使用“Phoenixtool”，这里是2.73版本，也是海外官网的最终版本
修改非UEFI类型的传统BIOS分两种情况，一种是“Award”BIOS，另一种是“AMI”BIOS，修改前要先分清自己BIOS类型
2、这里提供两个对应版本，修改“Award”类型传统BIOS使用“AwardTool 1.53”中文版：
3、修改“AMI”类型的传统BIOS使用“AMITool”，这里是最终版“AMITool 1.63”：
针对目前使用最多Phoenixtool2.73的，大家可能不知道怎么选择类型，官方教程如下：
Dell
- SSV2 - a new SLIC is inserted in one of the first modules
- Dynamic - an existing SLIC and any OEM/Table ID strings are updated
Phoenix
- Module - for interest only - uses the Phoenix tools PREPARE/CATENATE (old) and FI/FP (new) - this often screws the bios and causes bricks
- SSV2 - a new SLIC is inserted in a new ACPIxx module
- Dynamic - an existing SLIC is updated, OEM/Table ID strings updated, locks removed
EFI (All)
- Module - a pubkey and marker are inserted as two new modules with a typical GUID (this was how Insyde was originally done - but still works for some EFIs). In addition for EFIs, if it is not already present, the SLPSupport module (GUID 4C494E55-5849-5342-4554-544552212121) will be added.
- SSV2 - a module is modified with code to build a SLIC table at boot. This can cause a brick and is no longer first line.
- Dynamic - an existing SLIC table is modified and strings updated.
EFI (ASUS)
In addition to the above methods, there are 3 ASUS specific methods:
- NVRAM – The NVRAM is modified to contain SLIC data. This method requires a dumped BIOS (ie. It is individual to the computer). It is also persistent and survives subsequent flashes.
- New module – If a SLP2 module (GUID A1902AB9-5394-45F2-857A-12824213EEFB) is already present then a combined pubkey+marker module is added. In addition a signing key is added (significance uncertain).
- DMI – SLIC is added in the DMI region.
详细官方说明PDF：
下载下来学习一下。 多年前经常用……
{:5_264:} 感谢分享，感觉是XP和Win7时代的工具了，哈哈 xinxinlinux 发表于 2025-4-24 15:28
感谢分享，感觉是XP和Win7时代的工具了，哈哈
这几个工具仍就能将各版本的SLIC加到BIOS里，从SLIC2.1到SLIC2.7都可以 wolfkk 发表于 2025-4-24 17:44
这几个工具仍就能将各版本的SLIC加到BIOS里，从SLIC2.1到SLIC2.7都可以
联想的SLIC2.7不知道从哪里搞，网上目前只有Dell的
现在激+活机制那么简单 很久没用SLIC了 很好的教程和工具 homeuser 发表于 2025-4-24 18:23
联想的SLIC2.7不知道从哪里搞，网上目前只有Dell的
直接用DELL的，然后进系统后用DELL的证书替换下就行了 感谢分享。。。
bios修改工具
https://herder.cdn.bcebos.com/images/dot.gif 下载学习。谢谢！
感谢分享，正需要，nice{:5_266:}
页:
[1]