abcyou 发表于 2008-8-18 00:44

[求助]出现如下信息是否表示硬件不支持(图)



向高手请教,这是什么原因?

这个问题出现在安装开始,光区引导完后,安任意键开始,就出现如上图情况,就没动静了...

有人出现过这个情况吗?

以下是我的硬盘分区情况...



机器上装有3个硬盘,两个并口,一个串口...

我想装在第2或第3个硬盘上...

但都无法进入...

[ 本帖最后由 abcyou 于 2008-8-18 00:52 编辑 ]

abcyou 发表于 2008-8-18 09:29

原帖由 zhyxie 于 2008-8-18 02:15 发表 https://bbs.pcbeta.com/images/common/back.gif
可能是光盘里的默认启动内核mach_kernel和你的机子不匹配,使用其他可选内核试试

怎么选用其他可选内核???

我的机器 是 intel P4 2.4c , MSI 865PE 主板 , 1GB 内存 (512x2) , GF5200 显卡 ...

谢谢...

abcyou 发表于 2008-8-18 10:42

如何理解如下信息:

The boot: prompt waits for you to type advanced startup options.
If you don't type anything, the computer continues starting up normally. It
uses the kernel and configuration files on the startup device, which it also
uses as the root device. Advanced startup options use the following syntax:
    <kernel>
Example arguments include
device: rd=<BSD device name>       (e.g. rd=disk0s2)
         rd=*<IODeviceTree path>    (e.g. rd=*/PCI0@0/CHN0@0/@0:1)
kernel: kernel name                (e.g. "mach_kernel" - must be in "/" )
flags: -v (verbose)    -s (single user mode),
      -x (safe mode)-F (ignore boot configuration file)
"Graphics Mode"="WIDTHxHEIGHTxDEPTH" (e.g. "1024x768x32")
    For VESA 3.0 graphics, you may append a refresh rate
    after an "@" character (e.g. "1280x1024x32@75")
kernel flags                     (e.g. debug=0x144)
io=0xffffffff                      (defined in IOKit/IOKitDebug.h)

Example: mach_kernel rd=disk0s1 -v "Graphics Mode"="4096x4096x32@85"

If the computer won't start up properly, you may be able to start it up using
safe mode.Type -x to start up in safe mode, which ignores all cached
driver files.

Special booter commands:
?memory    Displays information about the computer's memory.
?video   Displays VESA video modes supported by the computer's BIOS.

Additional useful command-line options:
config=<file>             Use an alternate Boot.plist file.
platform=ACPI|X86PC       Use either ACPI or non-ACPI platform support.

Options useful in the com.apple.Boot.plist file:
"Boot Graphics"=Yes|No    Use graphics mode or text mode when starting.
"Quiet Boot"=Yes|No       Use quiet boot mode (no messages or prompt).
Timeout=8               Number of seconds to pause at the boot: prompt.

abcyou 发表于 2008-8-18 17:03

没有看到... 在安全模式下可以安装,但就无法正常启动...

liuqiangex 发表于 2008-8-19 11:59

/sad.gif 同问

哎!苹果啊,苹果!
页: [1]
查看完整版本: [求助]出现如下信息是否表示硬件不支持(图)